A MODIFIED GEOELECTRICAL PROCEDURE USING POLARDIPOLE ARRAYS—AN EXAMPLE OF APPLICATION TO DEEP EXPLORATION *

A bstract Dipole soundings are more sensitive to noise caused by lateral and superficial inhomogeneities than Schlumberger soundings. However, the former are preferable for deep explorations in view of the relatively short cables required. The simple solution of carrying out the field work by means of dipole spreads, and to transform the dipole resistivity diagrams into Schlumberger ones by means of proper formulae would be valid only for smooth and regular curves; but often, owing to the presence of lateral noises, the dipole data show a considerable scatter. For such cases a “continuous dipole sounding” method is proposed for which all successive dipoles are contiguous, so that all parts of the profiles are covered and interpolation is not necessary. Obviously the moving dipoles have lengths proportional to their distances, so that they appear equal in the usual bilogarithmic scale. It follows that only polar‐dipole arrays may be used. The transition from a dipole to the corresponding Schlumberger apparent resistivity diagram requires an integration constant which is not unequivocally determined. Therefore, the solution is not unique, but all possible derived Schlumberger diagrams have a common part. Similarly, they have some common interpretative results, which may be referred to the original dipole diagram obtained in the field. A special measurement technique is required since the dipole‐dipole voltages to be determined are noticeably smaller than the Schlumberger ones. This is true also because dipole soundings are used for great depths and for long distances between the two dipoles.