Premium
Short‐Duration Rapid‐Thermal‐Annealing Processing of Tantalum Oxide Thin Films
Author(s) -
Ezhilvalavan Santhiagu,
Tseng TseungYuen
Publication year - 1999
Publication title -
journal of the american ceramic society
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.9
H-Index - 196
eISSN - 1551-2916
pISSN - 0002-7820
DOI - 10.1111/j.1151-2916.1999.tb01807.x
Subject(s) - materials science , annealing (glass) , dielectric , tantalum , forming gas , dielectric strength , capacitor , oxide , grain boundary , grain size , leakage (economics) , analytical chemistry (journal) , composite material , optoelectronics , metallurgy , electrical engineering , microstructure , chemistry , voltage , macroeconomics , chromatography , economics , engineering
The effect of the rapid thermal annealing (RTA) processing time on the electrical properties of reactively sputtered tantalum oxide (Ta 2 O 5 ) films that was deposited onto Pt/SiO 2 / n ‐Si substrates, which resulted in the formation of a metal‐insulator‐metal (MIM) planar capacitor structure, was studied. The Ta 2 O 5 MIM capacitors were subjected to different RTA processing times (30 s to 30 min) at temperatures in the range of 600°‐800°C in an ambient oxygen‐gas atmosphere. A very‐short‐duration RTA process at a temperature of 800°C in oxygen gas for 30 s crystallized the films, decreased the leakage current density (to 10 ‐10 A/cm 2 at a stress field of 100 kV/cm), increased the dielectric constant (to 52), and resulted in the most‐reliable time‐dependent dielectric‐breakdown characteristics. The decrease in leakage current density was attributed to the reduction of oxygen vacancies and the suppression of silicon diffusion from the SiO 2 / n ‐Si substrate into the Ta 2 O 5 grain and the grain boundary, because of the shorter‐duration annealing. Increasing the annealing time to >30 s increased the leakage current density. The annealing duration of the RTA process was more crucial in regard to obtaining optimum dielectric properties and low leakage current densities. Time‐dependent dielectric‐breakdown characteristics indicated that Ta 2 O 5 MIM film capacitors that were subjected to an RTA process at a temperature of 800°C for 30 s in oxygen gas can survive a stress field of 1.5 MV/cm for 10 years. The electrical and dielectric measurements in the MIM configuration showed that Ta 2 O 5 is a good dielectric material and is suitable for use in future dynamic random‐access memories.