Premium
Microstructural Development during Sintering of Lithium Fluoride
Author(s) -
Bullard Jeffrey W.,
Searcy Alan W.
Publication year - 1997
Publication title -
journal of the american ceramic society
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.9
H-Index - 196
eISSN - 1551-2916
pISSN - 0002-7820
DOI - 10.1111/j.1151-2916.1997.tb03131.x
Subject(s) - sintering , materials science , lithium fluoride , volume (thermodynamics) , lithium (medication) , copper , grain growth , composite material , mineralogy , grain size , metallurgy , inorganic chemistry , thermodynamics , chemistry , medicine , physics , endocrinology
Measurements are reported of the influences of temperature, green density, and pore network breakup on the densification, grain growth, and pore volume distribution in LiF compacts. As long as most of the pore volume remained open to the compact perimeter, the ratio of the rate of densification to the rate of grain growth was higher than that sometimes reported for copper or typical oxides. Plots of the logarithm of densification rates versus sintered density for LiF are approximately linear during intermediate‐stage sintering, like those for some oxides. But the plots for LiF are unlike those of the oxides in that, for LiF, densification rates measured at different temperatures converge near the density at which half the pore volume is isolated from Hg intrusion. Calculations suggest that further densification of the LiF compacts is blocked because air trapped in isolated pores becomes sufficiently compressed to balance the sintering stress.