Premium
Biaxial and Uniaxial Data for Statistical Comparisons of a Ceramic's Strength
Author(s) -
GIOVAN M. N.,
SINES GEORGE
Publication year - 1979
Publication title -
journal of the american ceramic society
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.9
H-Index - 196
eISSN - 1551-2916
pISSN - 0002-7820
DOI - 10.1111/j.1151-2916.1979.tb19117.x
Subject(s) - ultimate tensile strength , materials science , composite material , uniaxial tension , brittleness , tension (geology) , bending , ceramic , three point flexural test , tensile testing
The uniaxial and equibiaxial tensile strengths of a brittle material were measured in bending. Equibiaxial tension was attained by concentric ring loading of disks and uniaxial tension by four‐point line loading of plates. The two specimen designs give equal volumes, surface areas, and stress gradients. Ground surfaces and lapped surfaces were tested. The equibiaxial tensile strength of a dense alumina was lower than the uniaxial tensile strengths for both ground and lapped surfaces, 8.5 and 8.1%, respectively. The Batdorf theory of flaw statistics, in which biaxial tensile strengths can be predicted from the statistical distribution of uniaxial tensile strength measurements, agreed with the data.