Premium
CORRECTION OF AN EXTREME CASE OF CRACKING IN THE DRYING OF BRICK 1
Author(s) -
Fréchette Howells,
Phillips J. G.
Publication year - 1929
Publication title -
journal of the american ceramic society
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.9
H-Index - 196
eISSN - 1551-2916
pISSN - 0002-7820
DOI - 10.1111/j.1151-2916.1929.tb18031.x
Subject(s) - chloride , ferric , brick , hydrochloric acid , chemistry , permeability (electromagnetism) , cracking , metallurgy , materials science , pulp and paper industry , mineralogy , composite material , membrane , biochemistry , engineering
I. In the manufacture of stiff‐mud brick from a highly colloidal clay of low permeability to water, drying breakage was extremely high even though the drying was conducted at a very slow rate under high humidity conditions. Laboratory investigation yielded two methods of correcting the faults: (1) Preheating the clay for half an hour at a temperature between 400 °C and 500 °C increased the permeability to such an extent that brick made from the preheated clay could be dried rapidly without cracking. (2) Coagulating chemicals, such as aluminium chloride, ferric chloride, sodium chloride, and hydrochloric acid, in conjunction with moderate additions of grog, increased the permeability and thus improved the drying properties of the clay. II. Plant scale tests using ferric chloride, sodium chloride, and grog resulted in the production of brick which could be dried safely in a reasonable time. The fired brick were improved in quality as to strength and color. III. The chemical treatment of the clay using 1% ferric chloride and 0.5% sodium chloride with 10 to 15% grog was adopted for plant operation and resulted in increased production, lower cost of manufacture, and improved quality of product.