Premium
Effects of a metal etchant and two primers on resin bonding durability to titanium
Author(s) -
Taira Yohsuke,
Yanagida Hiroaki,
Matsumura Hideo,
Atsuta Mitsuru
Publication year - 2004
Publication title -
european journal of oral sciences
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.802
H-Index - 93
eISSN - 1600-0722
pISSN - 0909-8836
DOI - 10.1111/j.0909-8836.2004.00090.x
Subject(s) - materials science , methacrylate , titanium , durability , luting agent , primer (cosmetics) , bond strength , acrylic resin , nuclear chemistry , aqueous solution , composite material , adhesive , metallurgy , chemistry , polymer , organic chemistry , coating , layer (electronics) , copolymer
The purpose of this study was to investigate the efficacy of an etchant in titanium bonding. The aqueous etchant consisted of 0, 5, or 10 wt% ammonium hydrogen fluoride (AHF) in combination with 0, 0.03, 0.3, or 3 wt% cupric chloride (CC). The two primers used were a phosphate‐methacrylate primer and a thiophosphate‐methacrylate primer, and two self‐curing resins (Super‐Bond C&B and MT) were employed as luting agents. Disk specimens were cast with a commercially pure titanium. The surface was air‐abraded with 50 µm alumina, etched for 10 s, rinsed with water, and then air‐dried. The primer was applied to the bonding area (5 mm in diameter), and an acrylic rod was bonded to the specimen with the luting agent. Shear bond strengths were evaluated after 24 h of water storage and following 10 000 thermocycles (4°C and 60°C). The post‐thermocycling bond strength was significantly increased with each of the two primers compared with the unprimed controls. The etchant containing 5 wt% AHF and 0.3 wt% CC further increased their durability, and microscopic observation revealed that innumerable submicron crystals were created on the etched specimen. The present results suggest that the chemical etching improved the resin bonding durability to titanium in combination with the primer used.