Premium
In‐situ effectiveness of residential HVAC filters
Author(s) -
Alavy Masih,
Siegel Jeffrey A.
Publication year - 2020
Publication title -
indoor air
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.387
H-Index - 99
eISSN - 1600-0668
pISSN - 0905-6947
DOI - 10.1111/ina.12617
Subject(s) - ashrae 90.1 , hvac , electret , filter (signal processing) , environmental science , ventilation (architecture) , engineering , air conditioning , materials science , meteorology , geography , electrical engineering , composite material , mechanical engineering
In this study, we explore different filter and contextual characteristics that influence effectiveness of high‐efficiency filters in 21 residences in Toronto, Canada. The in situ effectiveness was assessed with decay tests at the beginning and the end of filter life with four different filters (MERV 8‐14 from ASHRAE Standard 52.2) installed in operational HVAC systems, compared with either the system off or with no filter installed. There was considerable difference between median PM 2.5 effectiveness of the non‐electret filters when compared to electret filters (16% vs. 36%) of the same nominal efficiency (MERV 8). However, median PM 2.5 effectiveness of electret filters only slightly improved (between 5% and 9% absolute increase) as MERV increased from 8 to 14. There was more variation in filter effectiveness between the same filter in different homes than there was between different filters in the same home. Variations in filter performance arose because home‐specific particle loss rates (eg, ventilation rate) vary greatly in different buildings. The higher the loss rates due to non‐filter factors, the lower the effectiveness of a filter. Given the relatively large variation in effectiveness for a given filter over time and in different homes, increasing system runtime may be a productive way to improve filter performance in many homes.