Premium
Effect of pulsed laser irradiation on the SiC surface
Author(s) -
Suess Manuela,
Wilhelmi Christian,
Salvo Milena,
Casalegno Valentina,
Tatarko Peter,
Funke Matthias
Publication year - 2017
Publication title -
international journal of applied ceramic technology
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.4
H-Index - 57
eISSN - 1744-7402
pISSN - 1546-542X
DOI - 10.1111/ijac.12655
Subject(s) - materials science , composite material , layer (electronics) , x ray photoelectron spectroscopy , silicon carbide , irradiation , adhesive , laser , substrate (aquarium) , transmission electron microscopy , scanning electron microscope , adhesion , graphite , silicon , surface modification , chemical engineering , nanotechnology , metallurgy , optics , physics , nuclear physics , engineering , oceanography , geology
The effect of a pulsed laser irradiation (Nd: YVO 4 , 1064 nm) in air on the surface morphology and chemical composition of silicon carbide and on the adhesion with an epoxy adhesive was investigated. Scanning and transmission electron microscopies, atomic force microscopy, and X‐ray photoelectron spectroscopy revealed that the laser treatment reduced the contamination level of the surface and induced the formation of a silica‐based nanostructured columnar layer on the SiC surface. The mechanism for the formation of five different microstructural regions is described in this paper. In addition, the formation of a 5‐10‐nm‐thick graphite layer between the oxide layer and SiC was observed. The joining test with Hysol ® EA 9321 showed that the nanostructured columnar silica layer was completely infiltrated by the adhesive, thus leading to a significant increase in the joined specific area and a mechanical interlocking at the adhesive/substrate interface. Nevertheless, the apparent shear strength of the joined SiC samples slightly decreased after the laser processing of the surfaces from about 42 MP a for lapped SiC to about 35 MP a for laser‐nanostructured SiC. The formation of the graphite layer was found to be responsible of the poor adhesion properties of the SiC surfaces modified by the laser radiation.