Premium
Modeling of Methane Migration in Shallow Aquifers from Shale Gas Well Drilling
Author(s) -
Zhang Liwei,
Soeder Daniel J.
Publication year - 2015
Publication title -
groundwater
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.84
H-Index - 94
eISSN - 1745-6584
pISSN - 0017-467X
DOI - 10.1111/gwat.12361
Subject(s) - aquifer , methane , groundwater , geology , hydraulic fracturing , groundwater flow , drilling , natural gas , oil shale , directional drilling , groundwater model , groundwater discharge , petroleum engineering , environmental science , hydrology (agriculture) , geotechnical engineering , chemistry , mechanical engineering , paleontology , organic chemistry , engineering
The vertical portion of a shale gas well, known as the “tophole” is often drilled using an air‐hammer bit that may introduce pressures as high as 2400 kPa (350 psi) into groundwater while penetrating shallow aquifers. A 3‐D TOUGH2 model was used to simulate the flow of groundwater under the high hydraulic heads that may be imposed by such trapped compressed air, based on an observed case in West Virginia ( USA ) in 2012. The model realizations show that high‐pressure air trapped in aquifers may cause groundwater to surge away from the drill site at observable velocities. If dissolved methane is present within the aquifer, the methane can be entrained and transported to a maximum distance of 10.6 m per day. Results from this study suggest that one cause of the reported increase in methane concentrations in groundwater near shale gas production wells may be the transport of pre‐existing methane via groundwater surges induced by air drilling, not necessarily direct natural gas leakage from the unconventional gas reservoir. The primary transport mechanisms are advective transport of dissolved methane with water flow, and diffusive transport of dissolved methane.