Premium
Interpretation of a Pumping Test with Interference from a Neighboring Well
Author(s) -
Weber Simon,
Chapuis Robert P.
Publication year - 2013
Publication title -
groundwater
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.84
H-Index - 94
eISSN - 1745-6584
pISSN - 0017-467X
DOI - 10.1111/gwat.12014
Subject(s) - aquifer , interference (communication) , interpretation (philosophy) , geology , test data , aquifer properties , current (fluid) , groundwater , geotechnical engineering , petroleum engineering , mechanics , computer science , physics , telecommunications , channel (broadcasting) , oceanography , groundwater recharge , programming language
In confined aquifers, the influence of neighboring active wells is often neglected when interpreting a pumping test. This can, however, lead to an erroneous interpretation of the pumping test data. This paper presents simple methods to evaluate the transmissivity ( T ) and storativity ( S ) of a confined aquifer under Theis conditions, when an interfering well starts pumping in the neighborhood of the tested well before the beginning of the test. These new methods yield better estimates of the T and especially S values than when the interfering well influence is neglected. They also permit to distinguish between interfering wells and other deviations from the Cooper‐Jacob straight line, such as impermeable boundaries. The new methods were then applied on data obtained from a numerical model. The new methods require knowing the pumping rate of the interfering well and the time elapsed since the pumping started in each well, but contrary to previous methods, they do not require the aquifer natural level at the beginning of the test, which is often unknown if the interfering well has started pumping before the tested well.