Premium
Effects of build orientation and thickness of allowance on the fatigue behaviour of 15–5 PH stainless steel manufactured by DMLS
Author(s) -
Croccolo Dario,
De Agostinis Massimiliano,
Fini Stefano,
Olmi Giorgio,
Bogojevic Nebojsa,
CiricKostic Snezana
Publication year - 2018
Publication title -
fatigue and fracture of engineering materials and structures
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.887
H-Index - 84
eISSN - 1460-2695
pISSN - 8756-758X
DOI - 10.1111/ffe.12737
Subject(s) - materials science , allowance (engineering) , fatigue limit , direct metal laser sintering , perpendicular , machining , metallurgy , orientation (vector space) , bending , composite material , structural engineering , mechanical engineering , engineering , microstructure , geometry , mathematics
The present study is focused on the fatigue strength of 15–5 PH stainless steel, built by Direct Metal Laser Sintering. Six‐specimen sets were manufactured, mechanically and thermally treated and tested under rotating bending fatigue. The study investigates the effects of the build orientation (parallel, perpendicular, or 45° inclined with respect to the vertical stacking direction) and of allowance for machining (1 mm or 3 mm at gage). The results, processed by an ANOVA methodology, indicate that allowance for machining has a beneficial effect on the fatigue response. Removing the surface irregularities, averagely leads to a 19% enhancement of the fatigue limit. The build orientation also becomes beneficial, when the slanted samples are included in the experiment. In this case, a fatigue strength increase up to 20% can be achieved. Further developments will include the investigation of the effects of heat and surface treatments, involving also further materials in the study.