Premium
Optimal Design of the Hydrodynamic Multi‐Arc Bearing in a Centrifugal Blood Pump for the Improvement of Bearing Stiffness and Hemolysis Level
Author(s) -
Yasui Kazuya,
Kosaka Ryo,
Nishida Masahiro,
Maruyama Osamu,
Kawaguchi Yasuo,
Yamane Takashi
Publication year - 2013
Publication title -
artificial organs
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.684
H-Index - 76
eISSN - 1525-1594
pISSN - 0160-564X
DOI - 10.1111/aor.12163
Subject(s) - impeller , hemolysis , bearing (navigation) , stiffness , centrifugal pump , arc (geometry) , structural engineering , materials science , engineering , mechanics , mechanical engineering , computer science , physics , medicine , artificial intelligence , immunology
The purpose of the present study is to establish an optimal design of the multi‐arc hydrodynamic bearing in a centrifugal blood pump for the improvement of bearing stiffness and hemolysis level. The multi‐arc bearing was designed to fulfill the required specifications: (i) ensuring the uniform bearing stiffness for various bearing angles; (ii) ensuring a higher bearing stiffness than the centrifugal force to prevent impeller whirl; and (iii) adjusting the bearing clearance as much as possible to reduce hemolysis. First, a numerical analysis was performed to optimize three design parameters of the multi‐arc bearing: number of arcs N , bearing clearance C , and groove depth H . To validate the accuracy of the numerical analysis, the impeller trajectories for six pump models were measured. Finally, an in vitro hemolysis test was conducted to evaluate the hemolytic property of the multi‐arc bearing. As a result of the numerical analysis, the optimal parameter combination was determined as follows: N = 4, C = 100 μm, and H ≥ 100 μm. In the measurements of the impeller trajectory, the optimal parameter combination was found to be as follows: N = 4, C = 90 μm, and H = 100 μm. This result demonstrated the high reliability of the numerical analysis. In the hemolysis test, the parameter combination that achieved the smallest hemolysis was obtained as follows: N = 4, C = 90 μm, and H = 100 μm. In conclusion, the multi‐arc bearing could be optimized for the improvement of bearing stiffness and hemolysis level.