Premium
Interaction of helically wound fibre‐optic cables with plane seismic waves
Author(s) -
Kuvshinov B.N.
Publication year - 2016
Publication title -
geophysical prospecting
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.735
H-Index - 79
eISSN - 1365-2478
pISSN - 0016-8025
DOI - 10.1111/1365-2478.12303
Subject(s) - rayleigh wave , acoustics , distributed acoustic sensing , optics , materials science , geology , borehole , signal (programming language) , acoustic wave , seismic wave , sensitivity (control systems) , optical fiber , rayleigh scattering , fiber optic sensor , wave propagation , seismology , geotechnical engineering , physics , engineering , computer science , electronic engineering , programming language
Distributed acoustic sensing is a novel technology for seismic acquisition. In this technology, strain changes induced by seismic waves impinging on an optical fibre are monitored. Due to the fact that glass is relatively rigid, straight glass fibres are not sensitive to broadside waves. We suggest using distributed acoustic sensing systems with fibres helically wound around cables. One increases the fibre sensitivity to broadside waves by decreasing the fibre wrapping angle (the angle between the fibre axis and the plane normal to the cable axis). The optimal wrapping angle is chosen to minimize the impact of Rayleigh waves on the signal measured. This angle depends on the cable Poisson ratio, and it is approximately equal to 30° for cables composed of plastic. For reliable detection of seismic waves, one needs a good mechanical contact between the cable and the surrounding medium. On the other hand, the sensitivity of distributed acoustic sensing systems to primary waves can be significantly reduced if the cable is placed in a cemented borehole.