Open AccessDevelopment of a CT imaging phantom of anthromorphic lung using fused deposition modeling 3D printing
Author(s) -
Dayeong Hong,
Sangwook Lee,
Guk Bae Kim,
Sang Min Lee,
Namkug Kim,
Joon Beom Seo
Publication year - 2020
Publication title -
medicine
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.59
H-Index - 148
eISSN - 1536-5964
pISSN - 0025-7974
DOI - 10.1097/md.0000000000018617
Subject(s) - hounsfield scale , medicine , imaging phantom , voxel , nuclear medicine , fused deposition modeling , 3d printer , biomedical engineering , radiology , 3d printing , computed tomography , materials science , mechanical engineering , engineering , composite material
Development of patient-specific CT imaging phantoms with randomly incorporated lesions of various shapes and sizes for calibrating image intensity and validating quantitative measurement software is very challenging. In this investigation, a physical phantom that accurately represents a patient's specific anatomy and the intensity of lung CT images at the voxel level will be fabricated using fused deposition modeling (FDM) 3D printing. Segmentation and modeling of a patient's CT data were performed by an expert and the results were confirmed by a thoracic radiologist with more than 20 years of experience. This facilitated the extraction of the details of the patient's anatomy; various kinds of nodules with different shapes and sizes were randomly added to the modeled lung for evaluating the size-accuracy of the quantification software. To achieve these Hounsfield Units (HU) ranges for the corresponding voxels in acquired CT scans, the infill ratios of FDM 3D printing were controlled. Based on CT scans of the 3D printed phantoms, the measured HU for normal pulmonary parenchyma, ground glass opacity (GGO), and solid nodules were determined to be within target HU ranges. The accuracy of the mean absolute difference and the mean relative difference of nodules were less than 0.55 ± 0.30 mm and 3.72 ± 1.64% (mean difference ± 95 CI), respectively. Patient-specific CT imaging phantoms were designed and manufactured using an FDM printer, which could be applied for the precise calibration of CT intensity and the validation of image quantification software.