Open AccessTHE EFFECTS OF TWO AIR-POWDER ABRASIVE PROPHYLAXIS SYSTEMS ON THE SURFACE OF MACHINED TITANIUM: A PILOT STUDY
Author(s) -
Sreenivas Koka,
Jung Suk Han,
Michael E. Razzoog,
Thomas J. Bloem
Publication year - 1992
Publication title -
implant dentistry
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.538
H-Index - 65
eISSN - 1538-2982
pISSN - 1056-6163
DOI - 10.1097/00008505-199200140-00007
Subject(s) - abrasive , titanium , materials science , metallurgy
This in vitro pilot project compared the effect of two air-abrasive prophylaxis systems on the surface of machined titanium. Single Brånemark titanium abutment cylinders were exposed to the Prophy-Jet and Microprophy systems for 90 seconds each. Both of the test cylinders were compared with an untreated control cylinder by scanning electron microscopy. Machining marks were completely removed by the Prophy-Jet and only partially removed by the Microprophy. Both of the resultant surfaces appeared to be smoother and thus may be more resistant to plaque formation. A rationale for the removal of machining marks is presented, although the reason for the difference in removal by the two systems is unclear. The prophylaxis cleaning powders were also examined by scanning electron microscopy and exhibited similar particle dimensions and morphology. A noncrystalline deposit was observed on the surface of the abutment cylinder exposed to the Microprophy. Energy dispersive spectroscopy analysis revealed that the deposit consisted almost entirely of sodium. Further investigation of the deposit is needed.