Premium
Laboratory Measurement of Yield and Composition of Dry‐Milled Corn Fractions Using a Shortened, Single‐Stage Tempering Procedure
Author(s) -
Rausch Kent D.,
Pruiett Larry E.,
Wang Ping,
Xu Li,
Belyea Ronald L.,
Tumbleson M. E.
Publication year - 2009
Publication title -
cereal chemistry
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.558
H-Index - 100
eISSN - 1943-3638
pISSN - 0009-0352
DOI - 10.1094/cchem-86-4-0434
Subject(s) - endosperm , germ , chemistry , sieve (category theory) , tempering , fraction (chemistry) , repeatability , roller mill , moisture , chromatography , metallurgy , materials science , mathematics , biochemistry , mathematical analysis , organic chemistry , combinatorics , mill
The objective was to describe a laboratory‐scale dry‐milling procedure that used single‐stage tempering and determine the effect of hybrid on yields and fraction compositions in milled corn. Samples of 11 commercially available hybrids were processed through a laboratory dry‐milling procedure that used 1 kg samples of corn to produce milling fractions of large grits, small grits, fines, germ, and pericarp. Compositions of milling fractions (protein, neutral detergent fiber, ash, and crude fat) were determined. The procedure used a single‐stage tempering step that increased corn moisture from 15 to 23.5% wb during an 18‐min tempering period. Germ were separated from endosperm particles using a roller mill followed by screening over a sieve with 1.68‐mm openings. Coefficients of variability were small, indicating acceptable repeatability. Overall yield means were 39.2, 25.3, 13.8, 78.2, 14.3, and 6.8 g/100 g (db) for large grits, small grits, fines, total endosperm, germ, and pericarp, respectively. There were effects due to hybrid ( P < 0.05) on fraction yields and compositions of milling fractions. Correlations ( r ) among endosperm fractions (large grits, small grits, and fines) ranged from 0.54 to |–0.92|. Correlations among endosperm fractions and germ and pericarp were <0.68. The developed dry‐milling method estimated milling yields among hybrids with low standard deviations relative to the means and should be a useful tool for research and industry in measuring dry‐milling characteristics.