Nixtamalized Instant Flour from Corn ( Zea mays L.) Meal: Optimization of Nixtamalization Conditions

ABSTRACT The present investigation provides a new method for the nixtamalization process wherein corn endosperm fractions (corn meal) are treated in an alkaline solution that yields quality masa or instant masa flour like traditional nixtamalization process (alkaline cooking of corn with lime). The objective of this work was to determine the best combination of nixtamalization process variables for producing nixtamalized instant flour (NIF) from corn meal. Nixtamalization conditions were selected from factorial combinations of process variables including nixtamalization time (NT 8–22 min) and cooking temperature (CT 78–88°C). A central composite rotable experimental design was chosen. Lime concentration was 1% (10 g of Ca(OH) 2 /L of water) and ratio of corn meal to cooking medium was 1:4. At the end of each cooking, each treatment was steeped for 5 hr at room temperature (25°C). Nixtamalized corn meal was dried (55°C/12 hr) and milled to pass through 80 U.S. mesh to obtain NIF. Response surface methodology (RSM) was applied as an optimization technique over four response variables: masa firmness (MF), masa adhesiveness (MA), tortilla cutting force (CF), and tortilla tensile strength (TS). Predictive models for response variables were developed as a function of process variables. Conventional graphic methods were applied to obtain response variable values similar to the control (MASECA). Contour plots of each response variable applied superposition surface methodology to obtain a contour plot for observation and for selecting the best combination of nixtamalization time (NT 15 min) and cooking temperature (CT 83°C) for producing an optimized NIF from corn meal. Values of MF, MA, CF, and TS obtained from the predictive models were compared with those derived from experimental tests; a close agreement (coefficient of variance < 10%) between both values was observed.