English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Thermal barrier coating plays a vital role in protecting materials’ surfaces from high-temperature environment conditions. This work compares the demeanour of uncoated and air plasma sprayed Cr 3 C 2 –25NiCr and NiCrMoNb coated X8CrNiMoVNb16–13 substrates subjected to air oxidation and molten salt (Na 2 SO 4  + 60%V 2 O 5 ) environment condition at 900 °C for 50 cycles. Coating characteristics have been analyzed through microstructure, thickness, porosity, hardness, and bond strength. SEM, EDS and XRD analysis were used to analyze corrosion’s product at the end of the 50th cycle. Coating microstructures showed a uniform laminar structure that is adherent and denser with a coating thickness of 150 ± 20  μ m and porosity less than 3.5%. The Microhardness of both the coated substrates were higher than that of the bare substrate. Cr 3 C 2 –25NiCr and NiCrMoNb coating bond strength was 38.9 MPa and 42.5 MPa. Thermogravimetric analysis showed the parabolic rate law of oxidation for all the substrates in both environments. In the molten salt environment, all the substrates exhibited higher weight gain compared to the air oxidation environment. In both environmental conditions, the uncoated X8CrNiMoVNb16–13 alloy exhibited higher weight gain than the coated substrates. The formation of Cr 2 O 3 , NiO and spinel oxide NiCr 2 O 4  offers good resistance to corrosion to all the substrates in both the environmental condition. However, the presence of Mo and Nb significantly accelerated the corrosion of the substrate, thereby increasing the weight of the NiCrMoNb substrate. It is observed that Cr 3 C 2 –25NiCr and NiCrMoNb coating over the X8CrNiMoVNb16–13 substrate significantly protected the substrate against the hot corrosion than the bare alloy exposed to similar environmental conditions.

materials research express

Performance of air plasma sprayed Cr<sub>3</sub>C<sub>2</sub>–25NiCr and NiCrMoNb coated X8CrNiMoVNb16–13 alloy subjected to high temperature corrosion environment

Performance of air plasma sprayed Cr3C2–25NiCr and NiCrMoNb coated X8CrNiMoVNb16–13 alloy subjected to high temperature corrosion environment

Performance of air plasma sprayed Cr₃C₂–25NiCr and NiCrMoNb coated X8CrNiMoVNb16–13 alloy subjected to high temperature corrosion environment