Open AccessEffect of Al–Nb–B2O3–CuO system reaction products on microstructure and wear resistance of A356 alloy
Author(s) -
Jiang Jiachen,
Huimin Liu,
HU Qi-long,
Chong Zheng,
Zhenxing Qiao
Publication year - 2021
Publication title -
materials research express
Language(s) - English
Resource type - Journals
ISSN - 2053-1591
DOI - 10.1088/2053-1591/abda67
Subject(s) - microstructure , alloy , materials science , diffractometer , scanning electron microscope , optical microscope , transmission electron microscopy , metallurgy , liquidus , grain size , casting , composite material , nanotechnology
The aim of present work is study the effcet of Al-Nb-B 2 O 3 -CuO system reaction products on microstructure and properties of A356 alloy. B 2 O 3 powder, Al powder, CuO powder and Nb powder were used as raw materials to form Al–Nb–B 2 O 3 –CuO reaction system, and A356 alloy was refined by in situ reaction and near-liquidus casting. The size, phase, morphology and distribution of in situ reaction products were observed and analysed by optical microscope, x-ray diffractometer, scanning electron microscope and transmission electron microscope. The products of the Al–Nb–B 2 O 3 –CuO reaction system are mainly Al 3 Nb, NbB 2 and Al 2 O 3 . The ratio of the prefabricated block is 8:1:1:2 . When the prefabricated block was added at 2.5 wt%, the particle size of NbB 2 , Al 3 Nb and Al 2 O 3 is 0.5–1 μ m. The microstructure of A356 alloy is fine and uniform. The average grain size is refined to less than 20 μ m. Compared with untreated A356 alloy, the wear rate is reduced from 2.091% to 0.882%, and the average hardness of the alloy is increased from 41.3HRC to 58.2HRC.