Open AccessAcoustic Methods for Testing Gas Turbine Engine Blades
Author(s) -
В. Н. Трофимов,
I. N. Pyankov,
V. A. P’yankov
Publication year - 2020
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/969/1/012065
Subject(s) - turbine blade , mechanical engineering , materials science , structural engineering , turbine , engineering
In this paper the application technology of the ultrasonic testing method in the process of the PS-90A aircraft engine manufacturing is considered. It is known that the development and implementation of monocrystalline turbine blades for aircraft gas turbine engines are aimed at ensuring the material effectiveness or increasing the blade service life in comparison with polycrystalline blades. It is achieved at the cost of the increased long-term material strength in the same temperature range. Based on the results of the process and metallographic studies analysis, it has been established that during the structure formation under the internal stress action, hot crystallization cracks with an opening from 3 to 8 μm or more and a length of 3 to 35 mm along the grain boundaries can appear. Grains formation in most blades happens with their subsequent exit to the lock end, a bridge. The formation of hot cracks most likely occurs at a large grain disorientation angle (more than 25°). Grain boundaries on blades with hot crystallization cracks are located, as a rule, on the bridge at the junction of the blade root with the blade shank (“bottleneck”) with orientation along the blade axis. The method of contact laser-ultrasonic flaw detection (CLUFD) was tested on blades in the region of bridges using both pilot samples and standard parts in order to solve an urgent production and technical problem, that is timely detection of hot crystallization cracks in rotating turbine engine blades at the manufacturing stage. The use of the phased antenna array technology (PAR) in combination with a portable X-32 flaw detector represents a new level of blade ultrasonic testing. The flaw detector operates in a wide frequency range, which allows solving a very large range of various ultrasonic testing problems. The advantages and possibilities of the PAR technology with the portable X-32 flaw detector can be considered on the example of the turbine blade lock testing. S-scan (sector-scan) makes it possible to interpret the received signals quickly and easily.