Open AccessHydraulic Modelling of Riverbed Embankment Under the Hričov Weir
Author(s) -
Martin Pavúček,
Ján Rumann,
Peter Dušička
Publication year - 2020
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/960/4/042044
Subject(s) - weir , flume , levee , froude number , geotechnical engineering , hydraulic structure , flow (mathematics) , geology , hydraulics , flow conditions , supercritical flow , roller compacted concrete , riprap , engineering , geometry , history , cartography , geography , mathematics , archaeology , aerospace engineering , cement
The weir of the Hričov water structure has an untypical shortened stilling basin, which affects significant scour development in the downstream riverbed. A rockfill embankment structure adjacent to the stilling basin was constructed to prevent the formation of scours in the riverbed. However, increased flows at the weir erode this fortification and it is necessary to replenish the material back to the embankment after the flow situations. A 2D hydraulic model constructed in a flume of the Hydraulic laboratory was used for the research of new downstream fortification, which would be better resist the scouring effects. The model was created according to Froude’s modelling similarity as a 2D model of the weir structure with control gates and part the downstream riverbed consisting of gravel. Different designs of the embankment were not allowed to interfere with the existing construction of the water structure. The construction of the embankment was designed as a concrete “secondary” stilling basin adjacent to the existing one. Tested variants of the embankment were of different length and depth of the stilling basin. The length varied from 11 to 24 m and the depths varied from 0 to 1,8 m. Overall 11 different design of the embankment were investigated. Each design was tested for three different flow rates on the model simulating common and extreme flow situations at the weir. The flows were selected to simulate also different hydraulic phenomena at the weir – overflow, outflow, and free overflow. After each flow simulation the scour in the riverbed was measured. The measured scour parameters were depth of the scour, the distance of the deepest point from the existing water structure and the amount of the material carried away. The resulting parameters were assessed with respect to each other for the corresponding flow rates. The best results in scour reduction were achieved for horizontal embankment with the depth of 0 m. The designs with increased depth were causing secondary hydraulic jump in the riverbed which increased the scours. The tested designs of the embankments were able to reduce scour size by up to 45% for the outflow, by less than 20% for free overflow and by more than 80% at the overflow.