Open AccessAttenuation Effectiveness of Double Phase Stainless Steel Alloys for Fusion Reactor System
Author(s) -
Noha M. Ali,
Aly Saeed,
R.M. El Shazly,
S. A. Al-Fiki,
Mamdouh Eissa,
S. U. ElKameesy
Publication year - 2020
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/956/1/012008
Subject(s) - materials science , tungsten , aluminium , electromagnetic shielding , neutron , ultimate tensile strength , metallurgy , attenuation , elongation , beryllium , composite material , nuclear physics , physics , optics
Aluminium, tungsten and aluminium - tungsten ferritic stainless-steel alloys were developed and produced using 30 kg pilot plant induction furnace of medium frequency at the same conditions to be applied in nuclear reactor shielding material. Higher hardness, ultimate strength, and ultimate tensile strength are appeared in the developed alloys. Aluminium stainless-steel elongation had lower values. Total slow neutrons, neutrons > 10 keV, and slow neutrons of aluminium-tungsten based ferritic stainless steel alloys which carried out using 241 Am-Be neutron source as well as a wide range up to 1400 keV energies of gamma rays, which emitted from Co-60, Cs-137 and Eu-152, were used by means of sodium iodide (Tl) detector and studied using the XCOM program. Results showed that all studied stainless-steel alloys own a converge values of neutron macroscopic cross sections (Σ, cm“ 1 ). Moreover, there is no significant variation of the value of mass attenuation coefficients (σ, cm 2 /g) for the studied alloys. Good agreement between both experimental and calculated results of mass attenuation coefficients was achieved. A new composition for several nuclear applications such as, nuclear shielding applications were achieved.