Open AccessInvestigation and study of hydraulic fracturing and the efficiency of this in oil reservoirs naturally fractured and caven
Author(s) -
Abdolrahman Obeidavi,
Abdulhuseeien N. Alattabi,
Ebrahim Salemi
Publication year - 2020
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/928/2/022155
Subject(s) - hydraulic fracturing , fracture (geology) , geotechnical engineering , geology , petroleum engineering
Hydraulic fracture operation is one of the key technologies for the development of caven reservoirs. Modeling of hydraulic fracture processes to factors such as Situation of tensions, Shear strength and Orientation of natural fractures in the reaction(In particular, the potential for opening cracks in areas that are growing along the path of a hydraulic fracture) And also the length and height of the hydraulic fracture. Due to the presence of natural fractures with diffuse penetration and different orientations, the operation is complicated in caven reservoirs. For this purpose, two numerical methods are proposed for simulating the hydraulic fracture in caven reservoirs.In this paper, the hydraulic fracture model is considered in terms of the state of tensions, On the reaction between the hydraulic fracture and the natural fracture (45 °) And also the effect of length and height of hydraulic fracture, Developed and how to distribute induced stress around the well, In order to determine the direction in which the hydraulic fracture is formed in that direction The finite difference method and theindividual element for numerical solution are used and simulated.An inverse suction is an important parameter And in the operation of the hydraulic fracture will reduce production,This simulation is being studied. In every length of the hydraulic fracture, The rate of production is measured and the causes of changes in the input rate to the wells are discussed based on the natural fractures cut by the hydraulic fracture and the induction of the fracture. Finally, it can be seen that the optimum hydraulic fracture time will be The hydraulic fracture is able to connect natural fractures with large and large streams And finally, it is connected to the well, and there is a fundamental difference between the tensile and shear opening. The analyzes indicate that the growing hydraulic fracture, the tensile and shear stresses applied to the natural fracture.