Open AccessThe effect of eccentricity on the strength characteristics of glued rods made of steel cable reinforcement in solid wood
Author(s) -
A. A. Koshcheev,
Светлана Рощина,
Anatoliy Naichuk,
Nikolai Ivanovich Vatin
Publication year - 2020
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/896/1/012059
Subject(s) - rod , materials science , reinforcement , composite material , eccentricity (behavior) , ultimate tensile strength , groove (engineering) , epoxy , deformation (meteorology) , structural engineering , adhesive , metallurgy , engineering , medicine , alternative medicine , pathology , layer (electronics) , political science , law
The article is devoted to the study of the behavior of glued rods made of hot-rolled steel reinforcement and steel cables in a solid wood based on experimental tests of beam elements. The influence of eccentricity on the deformation - strength characteristics is studied with a straight-line gluing of reinforcing rods. The comparative analysis of the deformability indices of the centered and lateral gluing performed by milling with fillet groove U - shaped milling cutters was carried out. The technology of manufacturing samples, which consists of preparing wood, milling and pasting rebar into the groove, were described. The diagrams of deformation - strength characteristics of samples of various types were obtained and correlated. The conclusions were drawn about a local increase in strength in the case of using a steel cable as reinforcement and the negative effect of eccentricity on the strength of the adhesive joint during tensile tests. A visual analysis of the damage occurring during the test showed that in the manufacture of full-scale structures, glued rods should be closed with an array of wood. The conclusions were drawn about the optimal depth of milling of grooves for reinforcement, taking into account the use of adhesive compositions on epoxy resin filled with quartz sand - 1.5 depth of reinforcing bar diameter.