Open AccessHeat transfer characteristics of car radiator using tri-hybrid nanocoolant
Author(s) -
Anwar Ilmar Ramadhan,
W.H. Azmi,
Rizalman Mamat
Publication year - 2020
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/863/1/012054
Subject(s) - nanofluid , ethylene glycol , coolant , materials science , pressure drop , radiator (engine cooling) , heat transfer coefficient , heat transfer , volume (thermodynamics) , volumetric flow rate , heat transfer enhancement , chemical engineering , nanoparticle , thermodynamics , analytical chemistry (journal) , chromatography , chemistry , nanotechnology , mechanical engineering , physics , engineering
The use of nanoparticle coolant fluid in the car radiator increases the rate of heat transfer and facilitates the reduction of the overall radiator size. In this study, heat transfer characteristics of Al 2 O 3 -TiO 2 -SiO 2 nanofluids-based water/ethylene glycol were analysed experimentally and compared with water/ethylene glycol mixture. Four different nanofluids concentrations were prepared by adding 0.05 to 0.3 vol.% of tri-hybrid nanofluid nanoparticles dispersed a mixture of water/ethylene glycol (60:40). Experiments were carried out by varying the flow rate of coolant between 2 to 12 LPM for working temperature of 70 °C, the velocity of airflow remained at an average of 4 m/s in order to analyse the effect of coolant flow rate on heat transfer. The results showed that the heat transfer coefficient of Al 2 O 3 -TiO 2 -SiO 2 nanofluids or tri-hybrid nanofluids increased with increasing volume concentrations and temperatures. The maximum enhancement of the heat transfer coefficient for coolant side is observed at 39.7% at 0.3% volume concentration. The pressure drop and pumping power have the same pattern which increasing in volume concentrations, the pressure drop and pumping power will increase due to the concentration of the nanofluids. The correlation is applicable for water/ethylene glycol (60:40) mixture and Al 2 O 3 -TiO 2 -SiO 2 nanofluids with volume concentrations of 0.05 to 0.3% at 70 °C working temperature.