Open AccessThe Effect of Zirconium Addition on Corrosion Behavior of Zn-Zr Alloys as Biodegradable Orthopedic Implant Application
Author(s) -
Rizki Yuni Pratiwi,
Achmad Fauzi Trinanda,
Moh Waqyan Ghani Fahmi,
Sotya Astutiningsih,
Ahmad Zakiyuddin
Publication year - 2020
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/833/1/012085
Subject(s) - corrosion , passivation , materials science , zirconium , simulated body fluid , zinc , zirconium alloy , metallurgy , polarization (electrochemistry) , layer (electronics) , composite material , scanning electron microscope , chemistry
In this work, corrosion behaviour of zinc-based alloys with addition of 0.5%, 1%, and 2% of zirconium for biodegradable material as orthopaedic implant were investigated. The potentiodynamic polarization method is carried out to determine the corrosion resistance and corrosion rate of each composition in order to observe the effect of zirconium addition in a Kokubo simulated body fluid solution. The result showed that the addition of 0.5% and 1% of zirconium would decrease the corrosion rate of Zn-xZr alloys corresponding to 0.079 mm/year and 0.116 mm/year whereas the 2% addition would increase the rate to 0.188 mm/year due to the formation of Zr-rich precipitates inside the alloys. The passivation zone on the polarization curve showed the formation of the protected thin layer on the surface of the alloys which caused the corrosion rate to decrease, therefore confirmed the degradable ability of the Zn-xZr alloys. In general, the corrosion rates of Zn-xZr alloys were higher than Fe-based alloys and lower than Mg-based alloys. Moreover, the corrosion rates were much lower than the maximum rate of 0.4 mm/year for biodegradable implants so Zn-xZr alloys were suitable as biodegradable material implant for orthopaedic application.