
Electrochemical Disposition of Titanium Dioxide Photocatalyst on Micropores Silicon Wafer for Water Treatment Application
Author(s) -
Esmail Abdullah Mohammed Basheer,
Wafaa K. Mahmood,
Hayder A. Abdulbari
Publication year - 2020
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/736/4/042015
Subject(s) - photocatalysis , materials science , titanium dioxide , x ray photoelectron spectroscopy , chemical engineering , scanning electron microscope , substrate (aquarium) , silicon dioxide , wafer , silicon , titanium , nanotechnology , catalysis , optoelectronics , composite material , chemistry , metallurgy , organic chemistry , oceanography , engineering , geology
Titanium dioxide (TiO 2 ), due to wide band gap, has a limited use in water treatment process because of its low activity under visible light. Such drawback is usually associated with the inadequate solar spectrum that activates its surface, i.e., most of the photoexcited electron-hole pairs tend to recombine, leading to a reduction in the photocatalytic performance. Immobilization of TiO 2 on the surface of silicon is considered as a useful approach to overcome this drawback. However, the immobilization methods require high temperature and pressure, which limit the numbers and types of materials that can be utilized as a substrate. The known electrochemical deposition procedures are usually conducted through two major steps, electrochemical oxidation and hydrolysis of Ti(III) precursor to form a thin layer on the surface of the substrate, followed by thermal annealing to form crystalline phase. The present work introduces the immobilization of titanium dioxide on a microporous silicon (MPSi) wafer through direct electrochemical deposition, where titanium dioxide P25 was used in the electrolyte solution. The photocatalyst surface morphology and composition were characterized using Scan Electron Microscope (SEM), Electron Dispersive X-ray (EDX), X-ray diffraction (XRD), and X-ray Photoemission Spectroscopy (XPS) techniques. The photocatalytic activities of the new composites were investigated, and the experimental results indicate that the fabricated TiO 2 –MPSi showed higher methylene blue degradation rate than that of the conventional P25 catalyst. This is due to the unique photosensitivity and porous structure of the new photocatalytic composites. with the advantages of using this method, it is believed that more efficient photocatalyst can be produced.