Open AccessSupported liquid membrane for acetic acid extraction: Screening of membrane support preparation factors
Author(s) -
S. A. A. Malid,
Syed M. Saufi,
Norlisa Harruddin
Publication year - 2019
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/702/1/012047
Subject(s) - acetic acid , membrane , extraction (chemistry) , chromatography , chemistry , factorial experiment , humidity , hydrolysate , hydrolysis , organic chemistry , biochemistry , statistics , physics , mathematics , thermodynamics
It is essential to remove acetic acid from the biomass hydrolysate during the biorefinery process. The product yield can be effected by the acetic acid due to it inhibition to the microorganism used during the fermentation. Supported liquid membrane (SLM) can be used to remove the acetic acid. The membrane support plays important role in the SLM process. However, due to the use of the commercial membrane support, lack of studied was conducted on the fabrication of custom made membrane support for the SLM process. In the current study, two level full factorial design was employed to screen three fabrication factors during preparation of polyethersulfone-graphene membrane support via vapor induced phase separation technique. The factors screened were temperature of water bath (A) (30-60 °C), exposure time (B) (10-60 s) and air humidity (C) (70-90 RH%). The response was evaluated based on the extraction percentage of the acetic acid from 10 g/L aqueous acetic acid feed solution. All three main factors were significant to the SLM performance. Air humidity factor (C) gave the highest contribution of 28.96% among the main factors. In term of the interaction between factors, water bath temperature (A) and exposure time (B) give the most significant effect with 45.01% percentage of contribution. The highest extraction percentage of the acetic acid using SLM system was 75.95% using the membrane prepare at 30 °C water bath temperature, 10 s exposure time and 70% air humidity.