Open AccessEffects of crushed stone waste as fine aggregate on mortar and concrete properties
Author(s) -
Irfan Prasetia,
Arris Maulana
Publication year - 2019
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/620/1/012040
Subject(s) - mortar , compressive strength , slump , crushed stone , aggregate (composite) , materials science , concrete slump test , geotechnical engineering , composite material , geology
In this study, effects of crushed stone waste from Katunun’s quarry as fine aggregate on mortar and concrete properties will be examined. Samples with varying crushed stone waste replacement ratio, ranging between 0% until 100%, will be analysed at 3, 7 and 28 days curing time. Mortar sample is using 0.5 w/c ratio, while concrete sample is using 0.45 w/c ratio. The mixture of mortar sample is based on SNI 03-6825-2002, whilst concrete sample is based on SNI 03-2834-2000. The examination of concrete samples workability was conducted based on the slump test according to SNI 1972:2008. Moreover, the compressive strength test of mortar sample is based on SNI 03-6825-2002. In addition, the compressive strength test of concrete sample is based on SNI 1974:2011. Regarding compressive strength of mortar samples, the average compressive strength results of mortar with crushed stone waste rose significantly in line with the increase in replacement ratio. As for the workability of fresh concrete, sample using natural river sand had better workability compared to sample using crushed stone waste. However, the workability of concrete with crushed stone waste is still meet the slump value specified in the job mix formula. In addition, it has been found out that the combination of 75% crushed stone waste with 25% river sand will give the highest compressive strength compared to others combinations. Based on these findings, the utilization of crushed stone waste from Katunun’s quarry in mortar and concrete mixture can be proposed.