Open AccessAnalysis of a cylindrical cyclone separator based on the RMS data
Author(s) -
Zhuwei Gao,
J Wang,
J Y Wang,
Yu Maruyama,
Yaodong Wei
Publication year - 2019
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/617/1/012013
Subject(s) - cyclonic separation , mechanics , turbulence , reynolds averaged navier–stokes equations , reynolds stress , physics , turbulence kinetic energy , anemometer , flow velocity , reynolds number , inlet , flow (mathematics) , geology , geomorphology
This study presents a flow analysis on an atypical cylindrical cyclone separator with a large ratio of length to diameter. The Phase Doppler Particle Analyzer (PDPA) is used to measure the gas flow, and the numerical simulation is carried out by using the Reynolds Average Navier-Stokes (RANS) equation, the Reynolds stress model (RSM). Since the model is validated by good agreement between the numerical results and experimental data, and then the tangential velocity is analysed from the transient flow field and dynamic performance. The results showed that the tangential velocity of the transient flow field existed a non-axisymmetric phenomenon in the cross section, which was mainly presented as asymmetric distribution of the contours. The zero location of tangential velocity value was not coincided with the geometric center, where the tangential velocity was larger near the zero location. In addition, the dynamic character of tangential velocity was high-speed pulsating, with quasi-periodic characteristic. Meanwhile, a parameter of RMS was used to identify the degree of turbulence velocity deviating from mean velocity. The RMS data showed that the flow instability gradually increased with the fluid flowing into the cyclone separator from the inlet section, until reached a peak value at the position about 2.0 times the length to diameter. And then the flow instability gradually decreased, with the fluid energy dissipated.