Open AccessThe analysis of speed increase perspectives of nanostructuring burnishing with heat removal from the tool
Author(s) -
В. П. Кузнецов,
А. С. Скоробогатов,
Vladimir G. Gorgots,
А. S. Yurovskikh
Publication year - 2016
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/124/1/012127
Subject(s) - burnishing (metal) , materials science , nanometre , surface finish , surface roughness , composite material , work (physics) , metallurgy , mechanical engineering , polishing , engineering
The work deals with investigation of opportunities of speed increase of nanostructuring burnishing due to heat removal from the contact area of severe plastic deformation using friction via the tool. The work has analyzed changes of the structure, thickness and quality of the modified layer, while increasing treatment speed of the tool without heat removal and with heat-cooling system. It is established that the cooling system of the tool indenter with a cooling capacity of 10 W allows for the two-times increase of the critical speed of burnishing, and when exceeding this speed, the deformable material does not turn into a nanostructuring state. It is shown that heat removal provides for a stable maintenance of the indenter temperature, an increase in thickness of the nanostructured layer up to 5 μm and roughness up to Ra=150 nanometers at processing speed up to 0.17 m/s