Open AccessGrease formulation and characterization from waste automotive engine oil with the use of complex thickener
Author(s) -
Nurul Waheeda Abdu Rahman,
Ying Sun,
Mohd Aizudin Abd Aziz
Publication year - 2021
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/1195/1/012014
Subject(s) - grease , base oil , petroleum , thermal stability , waste management , fourier transform infrared spectroscopy , thermogravimetric analysis , waste oil , materials science , pulp and paper industry , environmental science , chemical engineering , chemistry , organic chemistry , engineering , composite material , scanning electron microscope
Waste engine oil one of the most abundant wastes in Malaysia, and through the reutilization of waste automotive engine oil helps to create a sustainable environment. The objective of this research is to develop the best formulation of lithium complex grease derived from waste automotive engine oil as base oil. The main focused parameter in this study is the different formulation ratio of base oil, thickener and co-thickener. Lithium 12-hydroxystearate is mixed with azelaic acid to produce lithium complex 12-hydroxystearate. Two different type of base oils, i.e. fresh automotive engine oil (FAO) and waste automotive engine oil (WEO) are used to formulate Li-complex grease. The grease derived from FAO is used to compare the physical properties derived from WEO. The texture of the formulation of base oil higher than 82 weight percentage was very fluid. The formulation of grease is carried out by differencing the ratio of the waste automotive engine oil, lithium complex 12-hydroxystearate and azelaic acid, which are 82:18, 80:20 and 70:30. The properties of the grease formulated is conducted through several tests, such as ASTM approach, Fourier Transform Infrared Spectroscopy (FTIR) characterization, oil separation and thermogravimetric analysis (TGA). Such interesting properties included consistency, chemical compound of the grease, oil separation and thermal stability. Based on the finding, the best formulated Li-complex grease is WG 3 , classified NLGI 3. The significant peak derived from FAO and WEO to observe is 1710 cm −1 as this peak indicated the oxidation stability. From the result, the intensity of carboxylic acid is weak that ranged 1709 – 1711 cm −1 . Hence, this indicated the grease formulated exhibited better oxidation stability. Furthermore, the formulated grease was thermally stable as the onset temperature was 250.09 °C. In conclusion, the formulation of Li-complex from WEO can be used as an alternative source of base oil in the grease industry, due to the good properties exhibition and preserving the environment as well as the increment of fossil fuel’s demand and cost.