Open AccessExperimental and numerical study of springback effect of advanced high strength steel in a V-shape bending
Author(s) -
Weerapong Julsri,
A Sanrutsadakorn,
Vitoon Uthaisangsuk
Publication year - 2021
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/1157/1/012042
Subject(s) - bending , ultimate tensile strength , structural engineering , materials science , high strength steel , compression (physics) , hardening (computing) , yield (engineering) , finite element method , tension (geology) , axle , composite material , engineering , layer (electronics)
Advanced high strength (AHS) steel sheets are increasingly used for the production of various automotive structural parts. The components of new lightweight vehicles have very complex Shapes, for which more precise forming procedures are required in order to achieve a desired geometry. Hereby, springback occurrences of such AHS parts are often the most critical concern. In this work, it aimed to investigate springback effects of the AHS steel grade 980 in a V-shape bending process. Experimental bending test and its corresponding FE simulations were conducted. The Hill’48 and Barlat89 yield criteria, and the Yoshida-Uemori (Y-U) kinematic hardening model were applied. The yield function parameters were obtained from the tensile tests of samples in various orientations. The Y-U model parameters were determined from a cyclic tension-compression test and were afterwards calibrated with the 1-element simulation. The resulted bend angles measured from the experiment and predicted by FE simulations using the different models were compared and evaluated. For the bending in this work, the Hill’48 and Barlat89 models showed the predictive errors of springback angle 1% and 2% higher than the Y-U model, respectively. The accuracy of springback prediction could be improved by the Y-U model using C 1 and C 2 parameters around 1%. In addition, effects of sheet thickness and punch radius on the springback were afterwards studied and discussed by using the Y-U model.