Open AccessInfluence of the cutting material on tool wear, surface roughness, and force components for different cutting speeds in face turning of CoCrFeNi high-entropy alloys
Author(s) -
Hendrik Liborius,
Thomas Uhlig,
Benjamin Clauß,
Andreas Nestler,
T. Lindner,
Andreas Schubert,
Guntram Wagner,
Thomas Lampke
Publication year - 2021
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/1147/1/012008
Subject(s) - materials science , machining , surface roughness , spark plasma sintering , cutting tool , surface finish , tool wear , alloy , high entropy alloys , boron nitride , carbide , composite material , metallurgy , surface integrity , microstructure
High-entropy alloys (HEAs) provide advanced properties like a high resistance to corrosion and wear. Concerning this and the elevated material costs wear protection layers are a possible field of application. Finish machining of these layers is necessary to achieve adequate surface properties. In the experimental investigations face turning of high-entropy alloy CoCrFeNi layers generated by spark plasma sintering is regarded. In this context, the influence of the cutting material and the cutting speed is analysed. For this, CBN tipped (two types), PCD tipped, CVD diamond tipped, and solid cemented carbide indexable inserts are used. Additionally, the influence of four different cutting speeds in the range between 100 m/min and 400 m/min is analysed. The feed and the depth of cut are kept constant with 0.05 mm and 0.1 mm, respectively. The geometrical surface properties are determined by tactile measurements and 3D laser scanning microscopy. The tool wear is analysed microscopically. Regarding the surface roughness, CBN tipped tools with a high content of boron nitride lead to the best results with the lowest roughness values irrespective of the cutting speed. The tool wear is also significantly reduced compared to the other cutting materials tested. The investigations represent the first results analysing the influence of the cutting material in machining of high-entropy alloys. Hence, this contributes to the enhancement of the field of application of HEAs.