The study of the possibility of X-ray inspection of fiber-optic sensors embedded into the structure of a polymer composite material

Annotation. Currently, during the operation of structures, it is important to use the so-called systems for monitoring the state of structures, which in real time allow you to monitor changes in temperature and deformation fields. To diagnose the condition in such systems, various sensors are used, for example, strain gauges, fiber-optic, piezoluminescent. Most modern monitoring systems use fiberoptic sensors because they have more advantages and fewer disadvantages than other sensors. When monitoring the state of a structure, fiber sensors are mounted on the surface of the structure, however, when monitoring structures made of composite materials, it is possible to introduce fiber lines directly into the structure of the composite material at the stage of manufacturing the structure. When fiber lines are introduced into the structure of a composite material, a number of difficulties arise, namely, due to the fragility of fiber lines, breaks are possible both at the exit from the structure and inside. When considering polymer composite materials, the problem of the location of fiber sensors arises due to the resin flow during the process of forming structures. The solution to the problems described above can be the creation of the so-called Smart-layer, in which the fiber lines will be rigidly fixed, which will protect the fiber from breaking, and limit the movement of the fiber during the formation of structures. Thus, within the framework of this work, we investigate the issue associated with the assessment of the location of fiber sensors in the Smart layer after the formation mode. The location of the sensors after the structure is formed is investigated by radiation methods of non-destructive testing.