Open AccessInfluence of lateral cyclic loading on the piled-raft foundation embedded in layered soil
Author(s) -
Wafaa A. Saleh,
Jasim M. Abbas
Publication year - 2021
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/1076/1/012087
Subject(s) - bending moment , deflection (physics) , saturation (graph theory) , geotechnical engineering , soil water , row , materials science , structural engineering , geology , mathematics , soil science , engineering , physics , optics , combinatorics , database , computer science
The work includes an experimental analysis was performed to determine the impact of several variables on the behavior of laterally loaded piled raft model (2×2) having a ratio of length to diameter (L/D=40) and a diameter spacing (S / D) ratio of 3, 5 and 7 at frequency (0.2) Hz embedded in layered soil. The results are submitted as load-deflection curves and bending moment profiles. The effects of degree of saturation, number of cycles, level of cyclic loads, and the location of piles in a row are studied in this work. The results illustrated that increasing degree of saturation for clay soil (mid-layer) decreasing the lateral resistance of this model by about (25%, 31%, and 39%) for S/D=3, 5, and 7 respectively and bending moment by about (7%, 15%, and 17%) for S/D=3, 5, and 7 respectively. The piles in the front rows resist the soil with its full capacity, while in the trailing rows (i.e back) the shadowing effect tends to cause a reduction in soil resistance. The results clarified that maximum bending moment for trailing row less than the leading row by about 7%. The presence of vertical loads lead to an improvement in the lateral resistance of the model with dry clay soil about (28%, 26% and 12%) for S/D=3, 5, and7 respectively, whereas the increase in the horizontal resistance of the model with partially saturated clay soil about (40%, 45%, and 44%) for S/D=3, 5, and 7 respectively, compared with the absence of vertical loads.