Open AccessImproving the characteristics of thermoelectric generator batteries based on bismuth telluride by optimizing the parameters of hot pressing n-Bi2Te2.4Se0.6
Author(s) -
А. А. Гребенников,
А. И. Бочаров,
В. А. Макагонов,
O. V. Kalyadin,
Vladimir Yuryev,
K. G. Korolev
Publication year - 2021
Publication title -
iop conference series. materials science and engineering
Language(s) - English
Resource type - Journals
eISSN - 1757-899X
pISSN - 1757-8981
DOI - 10.1088/1757-899x/1035/1/012008
Subject(s) - bismuth telluride , figure of merit , hot pressing , materials science , thermoelectric effect , thermoelectric generator , thermoelectric materials , thermal conductivity , pressing , metallurgy , seebeck coefficient , bismuth , composite material , optoelectronics , thermodynamics , physics
The effect of hot pressing modes (pressing pressure and holding time under pressure) on the thermoelectric properties of n-type bismuth telluride Bi 2 Te 2,4 Se 0,6 doped with Hg 2 Cl 2 was investigated. Samples were obtained by powder metallurgy technology - the synthesis of a chemical compound followed by hot pressing. A change in the hot pressing modes does not significantly influence the value of the thermo-EMF and conductivity of the samples. A change in the hot pressing mode significantly influences on the value of thermal conductivity. Both the increase of pressing pressure and the increase of the holding time under pressure leads to a decrease in the thermal conductivity of the material. Thus, the thermoelectric figure of merit of bismuth telluride can be increased by increasing the pressing pressure, holding time under pressure, or both parameters simultaneously. The increase of the thermoelectric figure of merit was 15% in the investigated samples. As a result of the tests of thermoelectric generator batteries, it was found that the output power of the battery made from a material with a high figure of merit was 27 W at temperatures 70 °C on the cold side, 300 °C on the hot side. The output power of the battery which was made from the material with a lower figure of merit was 25 W at a similar temperature regime.