Open AccessNumerical Investigation of Thermal Hydraulic Performance of Printed Circuit Heat Exchanger of Periodic Diamond Channel Shape
Author(s) -
Ali Aljelawy,
Amer M Aldabbagh,
Falah F. Hatem
Publication year - 2022
Publication title -
iop conference series. earth and environmental science
Language(s) - English
Resource type - Journals
eISSN - 1755-1307
pISSN - 1755-1315
DOI - 10.1088/1755-1315/961/1/012010
Subject(s) - nusselt number , materials science , reynolds number , micro heat exchanger , hydraulic diameter , mechanics , heat exchanger , diamond , working fluid , computational fluid dynamics , pressure drop , mechanical engineering , plate heat exchanger , thermodynamics , composite material , physics , engineering , turbulence
One of the most recently important heat exchangers is the Printed circuit heat exchanger especially in the nuclear power plant and aerospace applications due to its very compact geometry and small print foot. This paper presents a 3D numerical investigation on the thermo-hydraulic performance of PCHE with new non-uniform channel design configuration. The new channel design is a rectangular cross section with repeated converging diverging sections or periodic diamond shape. The influence of three design parameters on the heat exchanger performance was studied and optimized, pitch length (p), length ratio (β) and the converging diverging angle (α). The computational models investigated in this study based on the operating conditions of the intermediate heat exchanger of very high temperature gas cooled reactor with helium as the working fluid under operating pressure of 3Mpa and inlet temperature of 800 K. The Reynolds number varied from 200 to 2000. Different Pitch lengths were used (1.59, 3.18, 6.36, and 12.73) mm, and different C-D angle (0, 4.5, 6, 7.5, 9, 10.5 and 12) and also different length ratios were used (0.2, 0.25 and 0.333). Three performance parameters were studied the Nusselt number, friction factor and the overall performance evaluation factor. Results show that the thermal performance enhanced with decreasing the pitch length and with increasing C-D angle and it was shown that this enhancement was found only at high Reynolds number above 1400. The best performance obtained at p=3.18, α=6 and β=0.25 based on the overall evaluation performance.