Open AccessAn Experimental Study of Bricks Made with Different Mineral Additives
Author(s) -
Harjit Singh,
Mudasir Nazeer,
Aditya Kumar Tiwary
Publication year - 2021
Publication title -
iop conference series. earth and environmental science
Language(s) - English
Resource type - Journals
eISSN - 1755-1307
pISSN - 1755-1315
DOI - 10.1088/1755-1315/889/1/012049
Subject(s) - fly ash , compressive strength , absorption of water , lime , curing (chemistry) , materials science , environmental science , pulp and paper industry , waste management , composite material , metallurgy , engineering
Large numbers of bricks are required to meet the needs of increasing population for both residential and commercial sectors. The overall development and industrial development lead to the use of the traditional bricks at a very hefty rate. The traditional bricks are commonly made up of clay as its main component as a result it is on the verge of exhaustion. To standardize its broad, utilize and discovering its auxiliary one is the need of the hour. In this study, bricks were made by using different proportions of alternative materials like fly ash (FA), sand, lime and plaster of Paris. The size of specimen 230×110×70 mm was manufactured and quality constraints like compressive strength and water absorption were tested at different curing ages. The cost-effective mix design of the bricks for optimum compressive strength and rate analysis was also the part of this study. It was detected from the observation of results that the compressive strength decreases with increasing percentage in fly ash and increases with increasing percentage of sand and lime in fly ash-based bricks. Increment in water absorption was observed as fly ash content is increased and decrement of water absorption is seen with increasing percentage of sand and lime in fly ash-based bricks.