Open AccessExperimental Study of Flow Characteristics in A Rectangular Gravel Bed Channel
Author(s) -
Robby Yussac Tallar,
Dea Teodora Ferninda,
Efferiki,
Prabu Mandvi Hafiz Anjar Suhendar,
Frankie Pandapotan Purba
Publication year - 2021
Publication title -
iop conference series. earth and environmental science
Language(s) - English
Resource type - Journals
eISSN - 1755-1307
pISSN - 1755-1315
DOI - 10.1088/1755-1315/873/1/012047
Subject(s) - flume , flow (mathematics) , geotechnical engineering , hydraulic roughness , open channel flow , geology , sediment , flow resistance , channel (broadcasting) , hydraulics , flow conditions , surface finish , flow velocity , hydrology (agriculture) , geomorphology , mechanics , materials science , engineering , physics , aerospace engineering , electrical engineering , composite material
In an open channel flow, the characteristics of flow resistance are greatly affected by the roughness of the base and the walls of the channel. The existence of an object or other material, including gravel, also influenced the resistance of flow, therefore the purpose of this study is to examine the flow characteristics (flow velocity and flow resistance) in gravel open channel by using experimental study. A laboratory study to explore the effect of channel bed in terms of roughness of types of sediment on the hydraulics flow in 8 m length x 40 cm width a rectangular channel is presented. The study consists of an extensive set of rectangular flume experiments for flows with certain slope and sediment bed. The study was using the Before After Control Impact (BACI) method by set up five different scenarios. The results show that the lowest flow velocity (v=0.3041 m/sec) was occurred in the scenario 3 (50%sand and 50% gravel). Based on the Manning’ coefficient (n), it was also found that at the 100% discharge flow condition, the highest value of friction factor (f=0.0780) within 5 scenarios was scenario 3 with the sediment consisted of 50%sand and 50%gravel. Whereas the value of the lowest friction factor(f=0.0652) was scenario 1 with the sediment only gravel within. It concluded that the results gave the lower value of Manning’ coefficient (n) compared to the table of Manning’s coefficient (f= 0.04) for the channel with gravel base condition.