A Novel Approach for Design and Simulation of Equivalent Continuum Model of Lattice Structures Used in Tunnels and Caverns

Developing a continuum model of a lattice structure means expressing a complicated structure into a simpler one, and this is done by determining equivalent stiffness of the original structure, which can further be used to transform into desired simpler geometry for multiple benefits. Objective of this paper is to find a reliable method for determination of equivalent stiffness of lattice girder, comparing all the techniques suggested by various researchers. In present work the actual lattice girder structures and their equivalents were analysed using Finite Element Method tool Strand7. The primary focus is on lattice girder, which is a primary rock support system employed in tunnels and caverns. The equivalent stiffness so obtained is used as input parameter in numerical analysis tool STRAND7 for analysis of equivalent lattice beam. The maximum deflection and bending stress at centre of equivalent lattice beam were calculated and compared. In an attempt to develop a more accurate equivalent beam model a novel approach which is modification of the Method-B has been developed by authors. This Noval approach is the most convenient approach to develop an equivalent section with an extremely uncompromised representation of stress development and deformation characteristic. In this approach, the focus was made on the physical resemblance of a proposed equivalent beam with the actual lattice girder, leading us to adopt a beam of I-cross-section. This approach yielded similar stress and deflections in the equivalent beam as that of the actual lattice girder.