Open AccessCharacterization of joint roughness using close-range UAV-SfM photogrammetry
Author(s) -
Jesús González Galindo,
S. Senent,
Rafael E. Jimenez
Publication year - 2021
Publication title -
iop conference series. earth and environmental science
Language(s) - English
Resource type - Journals
eISSN - 1755-1307
pISSN - 1755-1315
DOI - 10.1088/1755-1315/833/1/012064
Subject(s) - photogrammetry , structure from motion , lidar , laser scanning , remote sensing , stereoscopy , joint (building) , point cloud , surface finish , geology , range (aeronautics) , 3d reconstruction , computer science , computer vision , artificial intelligence , engineering , laser , motion (physics) , aerospace engineering , optics , mechanical engineering , architectural engineering , physics
The Structure from Motion (SfM) photogrammetric technique has emerge as an efficient alternative for remote 3D rock mass characterization, compared to laser scanner (LiDAR) or stereoscopic photogrammetry, due to its economy and ease of use. In a similar way, the recent development of the drone-based technology has turn UAVs (“Unmanned Aerial Vehicles”) in a more accessible device for field applications in geotechnical engineering; allowing the acquisition of high quality images from a safe distance and without the need to stablish direct contact with the rock mass. However, the close distance applicability of UAV-SfM photogrammetry has not yet been investigated in detail to characterize joint roughness at close range (<10 m). In this work we employ the SfM technique for the generation of 3D models of the joint surfaces from aerial images taken at a relatively short distance from the slope (10, 7.5, 5, and 2.5 m). Roughness profiles are extracted from the 3D data, and their Z 2 statistical parameter is used to estimate the Joint roughness coefficient (JRC). Finally, the JRC value of those profiles-obtained with the UAV-SfM approach-have been compared with those obtained with traditional measurements based on manual methods. The proposed methodology is applied to a real case in an ancient open-cast mine in Northern Spain. The results obtained at different distances are compared to analyze the potential of UAV-SfM photogrammetry to develop accurate close-distance models. Results show that it is not necessary to get too close to the slope in order to get the best results, as this may cause overestimation of the JRC value.