Open AccessSelection of energy-technological modes of submerged-arc welding with silicomanganese slag for parts of mining equipment
Author(s) -
Н. А. Козырев,
А. А. Усольцев,
R. E. Kryukov,
А. Р. Михно,
V. Ya,
T sellermayer
Publication year - 2021
Publication title -
iop conference series. earth and environmental science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.179
H-Index - 26
eISSN - 1755-1307
pISSN - 1755-1315
DOI - 10.1088/1755-1315/823/1/012027
Subject(s) - welding , materials science , metallurgy , slag (welding) , heat affected zone , submerged arc welding , arc welding , electric resistance welding , flux (metallurgy) , composite material
The paper presents studies of the influence of energy-technological modes of welding on the physical and mechanical properties of welded joints obtained by submerged-arc welding, with the use of slag from silicomanganese production for parts of mining equipment. To study the welding and technological properties, we used a welding flux of 0.45-2.5 mm fraction based on a silicomanganese slag with a chemical composition, wt. %: 0.42 FeO, 16.22 MnO, 29.00 CaO, 41.34 SiO 2 , 6.53 Al 2 O 3 , 1.33 MgO, 0.24 S, 0.022 P, 0.008 ZnO, 0.031 C, 0.31 F, 0.15 TiO 2 , 0.025 Cr 2 O 3 . Automatic welding of 09G2S low-alloy steel under this flux was carried out by Sv-08GA wire. Various welding modes were investigated to ensure the required penetration depth and the absence of external defects (pores, cracks, cavities). Based on the data obtained, the dependences of the influence of the parameters of the welding mode on the mechanical properties of welded samples are plotted. It is shown that changes in the parameters of the current strength, welding speed and voltage can affect the physical and mechanical properties of the weld, as well as the transition of sulfur and hydrogen into the weld.).