
Study on the deformation and fracture laws of surrounding rock of a TBM tunnel in a deep composite stratum
Author(s) -
Cheng Ren,
Jiajie Zhu,
Jinshan Liu,
Juanjuan Du,
Junchao Yuan,
Shangkun Zhang,
Minlin Jiang,
Zhihao Shen
Publication year - 2020
Publication title -
iop conference series. earth and environmental science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.179
H-Index - 26
eISSN - 1755-1307
pISSN - 1755-1315
DOI - 10.1088/1755-1315/570/5/052045
Subject(s) - stratum , geotechnical engineering , geology , deformation (meteorology) , rock mass classification , composite number , shear (geology) , fracture (geology) , materials science , composite material , petrology , oceanography
To solve the key problems of tunneling and excavation, deformation and rupture of surrounding rocks in TBM tunnel model test research in deep composite stratum was conducted. This research employed a combined strategy of physical model test and numerical simulation for studying the deformation and fracture laws of the surrounding rock in a vertical section of a TBM tunnel in deep composite strata. In this study, the main research results are 1) The “soft and hard unevenness” and “combination effect” of the composite stratum affected the overall bearing capacity of the tunnel resulting in failure at a shallower buried depth or a lower stress concentration factor. 2) When the model was only excavated and unloaded, the plastic zone was basically near the periphery of the tunnel, resulting mainly in shear failure. In the lower layer of the composite stratum tunnel, the plastic zone due to its higher strength parameters was smaller than that in the upper layer. 3) Under the premise of the axial loading and surrounding constraints, the deformation and failure mode of the TBM tunnel in the deep composite strata exhibited “X”-type failure characteristics. The vertical section of the partially excavated rock mass revealed that the rock mass at the top layer of the tunnel caused a sudden and integral shear sliding of the palm face along the oblique direction upward 50°. This research provides significant and important guidelines for solving the problems of safety in TBM tunnel construction in a deep composite stratum.