Open AccessEffect of Connector on Smoke Temperature with Function of Pressing Capsules
Author(s) -
Hao Wang,
Zhenhua Yu,
Han Zheng,
Jianbo Zhan,
Geng Li,
Ying Zhang,
Jianliang Xie,
Xu Wang,
Tingting Yu,
Baoshan Yue,
Tao Wang,
Jiadong Yu,
Liwei Li
Publication year - 2020
Publication title -
iop conference series. earth and environmental science
Language(s) - English
Resource type - Journals
eISSN - 1755-1307
pISSN - 1755-1315
DOI - 10.1088/1755-1315/461/1/012096
Subject(s) - cable gland , smoke , materials science , pressing , filter (signal processing) , pressure drop , mechanics , composite material , mechanical engineering , engineering , electrical engineering , physics , waste management
In order to solve the shortcomings of single, fixed and irreplaceable cigarette capsules, the design of connector with function of pressing capsules which can replace and extrude multiple capsules at the same time was carried out, and the influence of this connector on smoke temperature was studied. ISO smoking model was applied to simulate the smoking process, and ANSYS software was used to fit the measured smoke. The geometric models of the smoke channel and the filter were established and meshed respectively. The pressure drop and temperature variation of the connector and the filter were simulated. The simulation results showed that CO and nicotine temperature were in transit. After passing the connector, the temperature drops sharply. When the filter rod reaches room temperature, it proves that the connector achieves the effect of reducing the smoke temperature.