Open AccessThe Threshold Value of Effective Replacement Ratio of Fly Ash Mortar Based on Amount of Calcium Hydroxide
Author(s) -
Gui-Bin Liu,
Yuanxin Guo,
Qiuyi Li,
Liang Wang
Publication year - 2020
Publication title -
iop conference series. earth and environmental science
Language(s) - English
Resource type - Journals
eISSN - 1755-1307
pISSN - 1755-1315
DOI - 10.1088/1755-1315/455/1/012125
Subject(s) - fly ash , mortar , curing (chemistry) , chemistry , calcium hydroxide , high calcium , calcium , pozzolanic reaction , nuclear chemistry , metallurgy , materials science , cement , composite material , pozzolan , portland cement , polymer chemistry , organic chemistry
The effective mineral admixture in mortar can consume the calcium hydroxide produced by hydration reaction because of pozzolanic effect. For high volume mineral admixture mortar, when the replacement ratio exceeds a certain ‘threshold’ value, the supply of Ca(OH) 2 amount is insufficient, the superfluous and ineffective mineral admixture will no longer react in mortar but as fine aggregate. This study presents an experiment study on the threshold value of effective replacement ratio of fly ash mortar by the comprehensive analysis of Ca(OH) 2 amount and consumption curves. Under the conditions of different curing temperature, the effective replacement ratios of fly ash mortar have been determined ultimately. The results showed that Ca(OH) 2 amount and consumption in mortar both decreased with replacement ratio. For fly ash mortar, at 20°C curing temperature, when the replacement ratio was less than 40%, the Ca(OH) 2 amount decreased obviously with replacement ratio. However, when replacement ratio was more than 40%, Ca(OH) 2 amount at 91d changed slightly with replacement ratio, the Ca(OH) 2 amount was consumed to a limit value at this time. Under the condition of 30°C curing temperature, when the replacement ratio exceeded 30%, the change of Ca(OH) 2 amount with replacement ratio was close to a straight line, the superfluous fly ash no longer consumed Ca(OH) 2 basically. Moreover, the consumption of Ca(OH) 2 was not much difference to the Ca(OH) 2 amount at the same replacement ratio under the condition of 20°C curing temperature. This result has a great significance on effective utilization of mineral admixtures in engineering application.