Open AccessStress Analysis and Safety Factor of Shaft on Pepper Peeler Machine to Reduce Environmental Pollution
Author(s) -
Firlya Rosa,
Rodiawan,
R. Priyoko Prayitnoadi
Publication year - 2019
Publication title -
iop conference series. earth and environmental science
Language(s) - English
Resource type - Journals
eISSN - 1755-1307
pISSN - 1755-1315
DOI - 10.1088/1755-1315/353/1/012031
Subject(s) - von mises yield criterion , reducer , safety factor , factor of safety , drive shaft , stress (linguistics) , rotational speed , composite material , yield (engineering) , pepper , materials science , structural engineering , automotive engineering , mechanical engineering , engineering , horticulture , finite element method , linguistics , philosophy , biology
Manually, pepper peeling uses water flowing in the river for 8-14 days that cause the river to become polluted by pepper peel and cause a bad smell. A pepper peeling machine is a tool to peeling pepper that has a system using two dishes consisting of a fixed top dish and a rotating bottom dish. A shaft is used to rotate the bottom dish with 14.58 rpm rotation, and it requires 1 kW electric motor with 1400 rpm rotation that is transmitted by reducer ratio of 23.3:1 and a bevel gear ratio of 1.6: 1. The shaft must be analyzed to determine its ability where the material is carbon steel material that has yield strength 350 MPa and is supported by two angular contact bearings which function as pin constraints and frictionless constraints. The shaft was analyzed using stress analysis with static analysis method using Autodesk Inventor Version 2019 software. Based on the analysis results, a minimum von mises stress of the shaft is 0.00 MPa and a maximum of 826.57 MPa on the diameter of 25 mm, minimum safety factors of 0.42 on the diameter of 25 mm and a maximum of 15. In Von-Mises stress and safety factor, the diameter of a shaft is not strong enough to withstand the load. To be able to meet the determined yield strength with a minimum safety factor of 1, the minimum diameter needed is 34.05 mm with a safety factor of 1.1. Using this machine, pepper peeling that done in the river can reduce river pollution.