Open AccessSimulation and experimental study on CO2 laser polishing quartz glass
Author(s) -
Ziruo Dai,
Tao Chen,
Xiao Han
Publication year - 2022
Publication title -
journal of physics. conference series
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.21
H-Index - 85
eISSN - 1742-6596
pISSN - 1742-6588
DOI - 10.1088/1742-6596/2174/1/012039
Subject(s) - polishing , materials science , quartz , surface roughness , laser , surface finish , optics , composite material , physics
High quality surface can be quickly obtained by laser polishing quartz glass. With the improvement of application requirements of quartz glass, the combination of process parameters for optimizing CO 2 laser polishing large area quartz glass sheet is proposed. The untreated quartz ground glass was scanned by CO 2 laser. Taking the roughness as the research index value, the parameters affecting CO 2 laser polishing were studied and analyzed. The transient model was established by COMSOL software to simulate the polishing process, predict the combination of polishing parameters, and obtain the temperature field change in the polishing process and the flow of quartz glass during melting. 300W continuous CO 2 laser was used in the experiment. The effect of surface improvement was the best when the laser power was 300W, the scanning rate was 100~200mm/s. The micro area roughness can reach Ra=10.18nm. Then, the chemical corrosion was combined with CO 2 laser polishing, and the quartz glass was corroded by hydrofluoric acid and sodium hydroxide solution, and then polished to obtain the average minimum roughness Ra=5.63nm. The research results can be put into practical industrial production, which is conducive to improving production efficiency and promote the development of laser polishing quartz glass technology.