Open AccessPolyamide self-lubricating composites filled with thermolysis products of lignin: composition, structure, properties
Author(s) -
Mikhail Yu. Serbinovskiy,
О. В. Попова,
T. A. Finochenko,
A Serbinovskaya
Publication year - 2021
Publication title -
journal of physics. conference series
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.21
H-Index - 85
eISSN - 1742-6596
pISSN - 1742-6588
DOI - 10.1088/1742-6596/2131/4/042020
Subject(s) - materials science , polyamide , composite material , lignin , graphite , absorption of water , carbon fibers , microstructure , pyrolysis , chemical engineering , composite number , organic chemistry , chemistry , engineering
Compositions of antifriction composites with a polyamide matrix filled with carbon additives obtained by modifying hydrolytic lignin (graphite from lignin, graphite bisulfate from lignin, thermally expanded graphite from lignin) have been developed. Powders of carbon materials were impregnated with cylinder oil before being added to the polyamide matrix. The tribotechnical characteristics of filled polyamide composites, their microstructure and water absorption kinetics have been investigated. It was found that the lowest values of the friction factor are observed in composites filled with thermally expanded graphite from lignin. The friction factor for such composites is 1.5-2 times less than the indicators obtained for currently used graphites. Thus, at specific loads of 0.67 and 2.33 MPa, the friction factor was 0.065 and 0.064, respectively. The investigated antifriction composites have low water absorption compared to pure polyamide. The maximum water absorption (2.2%) in the series of the studied composites had the samples filled with graphite from lignin with an oil content of 9%. According to the data of microstructural analysis, the structure of composites with additives of carbon materials from lignin is homogeneous. The components, including the oil plasticizer, are evenly distributed, the bulk of the oil is localized in the interlayer spaces. The elemental composition of the composites indicates the high chemical purity of the composites. Antifriction composites with the proposed additives are recommended for use in friction units operating in an aqueous mediumor an environment with high humidity.