Open AccessEffect of Mesh Topologies to Predict Cooling Effect on Evaporative Cooling Duct
Author(s) -
Agus Jamaldi,
Sarjito Sarjito,
Anis Siti Nurrohkayati,
N T Atmoko
Publication year - 2021
Publication title -
journal of physics. conference series
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.21
H-Index - 85
eISSN - 1742-6596
pISSN - 1742-6588
DOI - 10.1088/1742-6596/2111/1/012012
Subject(s) - evaporative cooler , duct (anatomy) , wire mesh , nozzle , chimney (locomotive) , materials science , mechanics , airflow , pressure drop , inlet , environmental science , mechanical engineering , composite material , engineering , physics , medicine , pathology
This paper examines the effect of different mesh types on a numerical study of evaporative cooling in the chimney. This research is a follow-up study from previous research. The test specimen used is an evaporative chimney design with the addition of a nozzle arrangement in it. The main focus of this research is the study of mesh refinement, namely by applying structured mesh during the simulation process. Three types of mesh with different levels of fineness were used for the specimens. They are coarse ( mesh A), medium (mesh B), and fine (mesh C). In addition to differences in mesh, research was also carried out with variations in the level of relative humidity (RH). The RH levels used are 5, 10, and 15%. Two main parameters of evaporative cooling performance are airflow distribution and temperature drop in the chimney. Method for measuring the distribution of airflow and temperature drop in the chimney by making five planes with different heights. The results showed that the simulation with mesh B produced a good agreement data with previous studies than mesh A and C. The RH level that generated the most optimal cooling is found at 5% RH.